Back to BlogGate Automation
Gate Automation Safety: What Every Installer Needs to Know
January 20, 2027
Automated gates remain one of the most regulated areas of the physical security industry, and for good reason. Improperly installed or maintained gates can cause serious injury or death. Every installer, dealer, and integrator working with automated gates must be thoroughly familiar with the applicable safety standards.
UL 325 covers the safety standard for vehicular gates and operators, specifying requirements for entrapment protection devices, inherent force limits, and installation requirements. ASTM F2200 addresses the standard practice for the design, fabrication, and installation of vehicular gates.
Key safety requirements include proper placement of photoelectric sensors, the use of monitored safety edges on gate leading edges, signage and warning lights, and regular maintenance and testing of all safety devices.
Common installation mistakes include insufficient sensor coverage, improper safety edge placement, and failure to address pedestrian access near automated gates.
At The Security Show, gate automation manufacturers and safety experts will offer hands-on training sessions covering installation best practices, code compliance, and liability considerations.
UL 325 covers the safety standard for vehicular gates and operators, specifying requirements for entrapment protection devices, inherent force limits, and installation requirements. ASTM F2200 addresses the standard practice for the design, fabrication, and installation of vehicular gates.
Key safety requirements include proper placement of photoelectric sensors, the use of monitored safety edges on gate leading edges, signage and warning lights, and regular maintenance and testing of all safety devices.
Common installation mistakes include insufficient sensor coverage, improper safety edge placement, and failure to address pedestrian access near automated gates.
At The Security Show, gate automation manufacturers and safety experts will offer hands-on training sessions covering installation best practices, code compliance, and liability considerations.